Bazille tutorial

Old-School House Chords with Bazille

In this tutorial we will be creating some old-school house chords using Bazille.

Made with Bazille version 1.1

Filed in

Sound design

Back to all tutorials

Here is an example on the sound we will be making in this tutorial:

[[audio player]]

And here is a screenshot of the MIDI we used for this hook, played in B minor and quantised using Ableton’s swing setting Swing 16-15 to tighten up the recording but keep some of the loose feel. Also take note of the variation in velocity created from the live playing.

MIDI notes

MIDI notes used in the tutorial

Step 1

Begin by loading an instance of Bazille onto a new channel and create your MIDI pattern. Bazille should load the INIT patch by default, with OSC 1 routed to OUT 1.

We will start by setting up our sound with a filter, and an envelope controlling the filter. In order to achieve this in Bazille we will have to make use of its semi-modular architecture: we begin by clicking on the wire connecting OSC 1 to the OUT 1 and dragging it over to one of the grey inputs on FILTER 1.

We then need to route FILTER 1 to the OUT 1 where OSC 1 was routed previously. Here we can choose what type of filter we want for our sound. There are four different types of low-pass with varying slopes, a high-pass and a band-pass. We opt for LP24 and drag this to OUT 1.

[[audio player]]

Step 1 arrangement

Bazille cable arrangement for step 1

Step 2

Next we take the cutoff down to quarter of the way and also push up resonance to quarter.

To help shape the filter we could apply an envelope to the cutoff frequency. ENVELOPE 1 is the amp envelope so we’ll use ENVELOPE 2. Click and drag the red output socket next to the ADSR on ENVELOPE 2 and drop it onto one of the grey Input sockets on one of the controls pointing to the Cutoff, then turn up this control all the way. We have now applied envelope modulation to the cutoff frequency of FILTER 1.

We can now use the ADSR on ENVELOPE 2 to shape the sound. We keep a fast attack, medium/low decay, no sustain and short release. We also push up the release on ENVELOPE 1. This means when the cutoff frequency is low it makes the notes short, but when the cutoff opens up we hear the release on ENVELOPE 1, making for nice movement in breakdown sections.

[[audio player]]

Step 2 arrangement

Filter setup in step 2

Step 3

Next we add another oscillator to fatten up the sound. First we need to route the oscillator through the filter in order to hear it. We click and drag the red output socket in the bottom right of OSC 2 and drop it onto one of the grey input sockets on FILTER 1.

Unlike OSC 1, the PD (phase distortion) control is turned all the way to down on OSC 2, meaning we will hear a sine wave on OSC 2, whereas OSC 1 is playing a sawtooth. Right-click (or ctrl-click) on the box where it says Saw and select Square from the list, then take the PD control all the way clockwise so OSC 2 plays back a square wave. This complements the saw nicely and adds some extra depth to the sound.

We also take down the envelope modulation on the cutoff slightly to tone down some of the top end on the sound.

[[audio player]]

Step 3 arrangement

Oscillator setup in step 3

Step 4

With our second oscillator set up, it might be interesting to modulate the PD control for some even more complex movement on the sound.

This time we use an LFO as our modulator by clicking and dragging the red output socket in the bottom left of LFO 1 and connecting it to the PD modulation control. We also turn up the PD modulation control all the way.

With the LFO modulation set up in this way we can apply either a saw, backwards saw or triangle wave LFO and anything in between (depending on what the Wave control is set to). We keep everything on LFO 1 as it is, other than changing the Rate control to 1/2. With the Wave control set to half way it generates a triangle wave.

Playing some notes back and increasing or decreasing the amount of PD modulation on OSC 2, you can hear what this modulation brings, adding a nice character to the sound. We also push up the Velocity control on ENVELOPE 2 for some more dynamic triggering of the envelope modulation. This works well to add some subtle movement to our phrase with the slight variations in velocity we have.

[[audio player]]

Step 4 arrangement

Bazille cable arrangement for step 4

Step 5

We detune OSC 2 slightly by taking the Cents setting up to 10.00, then we head to the Tweaks & FX section, turn on the distortion and boost the input slightly.

Step 5.1 arrangement   Step 5.2 arrangement

Adjustments in step 5

Both these tweaks serve to add thickness and warmth, producing a stronger sound.

We also add some effects in Ableton, applying an EQ Eight to roll off some low end in the sound and boost some highs with a high shelf. We also add Xfer Records’ LFO Tool and use one of the presets for a sidechain-style effect on the sound, ducking it in volume slightly when the kick sounds.

[[audio player]]

Step 6

The final effects we add are reverb and delay, using Valhalla’s Vintage Verb and Ableton’s Ping Pong Delay respectively. Adding these effects via a send means we can process the effects separately from the source sound, applying compression and EQ to make sure the reverb and delay do not clutter the mix too much.

Be sure to experiment and automate some of the settings on Bazille (such as the modulation envelope attack and decay and the filter controls) to add intensity and movement to your arrangement.

[[audio player]]

Step 6 arrangement

Final tweaks in step 6